EMERGING DEFENSE SOLUTIONS โ€ข DEFENSE & TRAINING DIVISION

๐ŸŽฏ Ballistic Holdover Calculator

Input caliber and optics height to solve trajectory and holdover for tactical marksmanship. Visual flight path with target-size tolerances.

โš ๏ธ Standard atmospheric calculation (59ยฐF, 29.92 inHg). Verify live-fire zero at the range before operational deployment.
CONFIGURATION
MUZZLE VELOCITY
3,240 fps
BULLET WEIGHT
55 gr
G1 BC
0.255
ZERO RANGE
100 yds
OPTIC HEIGHT
2.5"
๐Ÿ“ˆ BULLET PATH โ€” .223 / 5.56MM โ€” 55GR FMJZeroed at 100 yds ยท Inches above/below line of sight
0Range (yards)-6"-3"0"+3"+6"Inches from Line of SightLine of Sight
Vital Zone (10")
A-Zone (6")
Head Box (3")
Bullet Path
๐Ÿ“Š HOLDOVER DATA TABLE+ = above sight line   โˆ’ = below sight line
Range (yds)Holdover (in)Holdover (MOA)Velocity (fps)Energy (ft-lbs)Target Hit Size
0 -2.5"โ€”3,2401,282โœ“ Vital Zone (Deer)โœ“ IPSC A-Zone
๐ŸฆŒ
Vital Zone (Deer)
Critical zone: 10" diameter
Hold is within zone up to: < 25 yds
Beyond this range โ€” apply holdover correction
๐ŸŽฏ
IPSC A-Zone
Critical zone: 6" diameter
Hold is within zone up to: < 25 yds
Beyond this range โ€” apply holdover correction
๐Ÿ‘ค
Head Box (3x5")
Critical zone: 3" diameter
Hold is within zone up to: < 25 yds
Beyond this range โ€” apply holdover correction
๐Ÿ’ก How to use this: At each range, aim above your target by the holdover amount shown. For example, if your bullet is -4.2" at 200 yards, aim 4.2 inches above your intended point of impact. 1 MOA โ‰ˆ 1.047" per 100 yards. This calculator assumes a standard G1 drag model at sea level โ€” actual results will vary with elevation, temperature, and wind.
SYSTEM TELEMETRY & BALLISTIC CAPABILITIES
CALCULATOR ENGINE
Point-Mass Euler Integration
G1 Standard Atmosphere Drag Table
CALIBER SUITE
10 Pre-Calibrated Loads
5.56 NATO, .308 Win, 6.5 CM, .300 BLK, 9mm
DEPLOYMENT DOMAIN
defense.eds-360.com
Defense & Training Operational Console
Emerging Defense Solutions โ€” Defense & Training Division โ€ข Ballistic telemetry for operational training โ€ข Always verify live-fire on the range